-
QCan RaeX automatically adjust chemical dosing based on real-time water changes?
AYes. Advanced RaeX systems use pH, conductivity, and turbidity sensors with PLC control to adjust reagent dosing dynamically.
-
QHow is clarification efficiency evaluated?
A
It is assessed through turbidity, total suspended solids (TSS), floc quality, and retention time — by comparing inlet and outlet performance.
-
QHow should flocculant or reagent solutions be stored to maintain stability?
A
They should be kept in sealed containers, at stable temperature, away from light, and at consistent concentration to prevent degradation.
-
QHow often should deep chemical cleaning be performed compared to routine CIP?
A
When standard CIP cannot restore performance or solids removal efficiency, a stronger chemical regeneration should be carried out.
-
QHow should polymers be mixed to optimize particle binding?
A
Begin with vigorous mixing to disperse the polymer, followed by gentle agitation to promote floc growth — the “bridging” principle.
-
QHow does temperature influence floc formation?
A
Higher temperature accelerates reaction kinetics but may reduce floc stability and adsorption performance.
-
QCan overdosed antiscalants increase fouling in flocculation systems?
A
Yes. Excess or incompatible antiscalants may precipitate or interfere with proper floc formation.
-
QWhat are the main causes of unwanted precipitation or scaling in clarification systems?
A
These can result from pH variations, excessive chemical dosing, incompatibility between reagents, or supersaturation conditions.
-
QWhat SDI value is acceptable for water entering a chemical-physical pretreatment system?
A
An SDI value of 3 or lower is recommended to prevent clogging and excessive particulate fouling.
-
QHow does pH affect coagulation and what is the correct dosing sequence?
A
pH strongly influences coagulant efficiency; many coagulants such as iron or aluminum salts perform best within a specific range.In some cases, alkalinity is added before the coagulant to stabilize the optimal pH.
-
QHow can I request a chemical-compatibility test or process consultation?
A
Requests can be sent via the Support & Download section of the Deepflow website or by email to service@deepfloweco.com.The technical team assists with sampling, lab testing, and chemical optimization.
-
QCan one RaeX unit manage multiple treatment lines?
A
Yes. RaeX can be configured with automatic valves and multiple tanks to treat several wastewater lines or washing cycles in parallel.
